|
Home » Solid Carbide
Spiral Bits
Solid Carbide
Spiral Bits
Non-Clogging, Quick Action, Clean Cutting!
(0
customer reviews)
Our production quality spiral bits combine effective chip removal with a continuous shearing action cut not obtained from a standard straight bit. You’ll get smoother cutting action with better results.
Up-cut Bits provide faster cutting while they pull chips up and out of the work or towards the router. They are excellent bits to use when cutting material in a table mounted router. They hold the work piece to the router. Ideal for mortise and tenon, grooving, slotting or routing deep blind holes.
Down-cut Bits cut slower and push chips away from the router to eliminate top surface splintering. Use for pattern cutting or when going completely through the board as it allows clear vision of the cutting line. Ideal for fine finish work such as veneers, laminates, inlays and repairs because they prevent upper edge tear outs. Use Down-cuts for trimming and sizing.
3-Piece Up-Cut Solid Carbide Spiral Set
Includes:
1/4" Shank: 1/4" x 1"
1/2" Shank: 3/8" x 1-1/4" and 1/2" x 1-1/2"
7-Piece Up-Cut Solid Carbide Spiral Set
Includes:
1/4" Shank: 1/8" x 1/2", 5/32" x 9/16", 3/16" x 5/8", 1/4" x 1"
1/2" Shank: 5/16" x 1", 3/8" x 1-1/4", 1/2" x 1-1/2"
All bits solid carbide, two flute. USA.
* 106-0925, 106-0935, 106-0965, 106-0975 are three fluted.
• Tell
a friend about this item
|
|
Receive special offers and promotions via email.
|
;){kind=link}
