Saw Blade Finishing Stone | OLSON AC70013
Saw Blade Finishing Stone for improved finish and blade performance. Lay the side of the wood handle on the table surface and place the silicon carbide stone against the back of the blade to round off the edges and correct weld misalignment. No lubricant needed.
Use it to round the back of Band Saw Blades as they run to:
Permit tighter radius cutting
Clean welds
Promote longer bearing life
Remove mushrooming (spread) on back of blade caused by pressure against thrust bearings
Inhibit metal fatigue (especially on 1/16" and 1/8" wide bands)
Decrease friction, heat, and noise
Promote smoother finish
Increase blade life
Scroll Saw Blades
Remove bur flow (right side) on Scroll (unset, skip, and double tooth) Saw Blades to:
Promote straighter (more easily controlled) cuts
Provide a smoother finish
