Vertical Raised Panel Router Bits | EAGLE AMERICA
Important Specs
- Overall length: 3"
- Diameter: 1"
EAGLE AMERICA Vertical Raised Panel Router Bits are designed for straight and square panels only. This has a Ogee Bead profile. Make attractive drawer fronts, table tops, plaques and moldings. By raising or lowering the bit in your router you can adjust the profile from 1" to 1-1/2" of reveal for 5/8" to 3/4" stock. Vertical panel raisers require the use of a router table with a support fence. A minimum 2 H.P. variable speed router is recommended. Multiple light passes are required. Carbide tipped. Made in the USA
The Eagle America Difference
The Eagle America Brand was created for the professional woodworker who needs a serious router bit with an exceptional cut, extremely high durability and longevity.
Lifetime Warranty against defects in workmanship and materials.
Precision ground carbide to +/- .005 tolerances and Balanced to speeds in excess of 25,000 RPM for true, chatter-free running.
High hook and relief shear angles with wide open gullets for easy chip ejection.
Single-piece, SOLID STEEL Bodies, not just a mere sand casting.
Finest Micrograin Carbide up to C-4 grade with tips up to 1/8" thick for longer life.
Shielded, high-RPM-rated bearings have special lubricants for mar-free routing.
Carbide honed with a 600 grit diamond wheel to a razor sharp mirror finish edge.
Steel is heat treated up to 3 times, and tested up to 45 RC hardness to guarantee against breakage.
Precision-ground shanks.
You May Also Like
-
$99.99$70.00
