45 Degree Lock Miter Shaper Cutters for a 90 Degree Joint | MLCS
Important Specs
- Stock Thickness: 5/8" to 1"
- Carbide Height: 1"
- Large Diameter: 4"
MLCS Lock Miter Shaper Cutters are designed to join materials at 90 degrees by cutting a 45 degree miter and a perfect matching tongue and groove glue joint. This joint not only increases mechanical strength, but also increases glue surface area and automatically aligns parts. Cut soft or hard woods, plywood panels, glue-bonded panels, fiberglass or plastics. These cutters are designed to be worked under 13,000 RPM. Fit both 1/2" and 3/4" spindles. All shaper cutters come with 3/4" bores and 1/2" bushing adapters. Three wing, tungsten carbide tipped.
The MLCS Difference
The MLCS Brand was created for the cost conscience woodworker who needs a quality router bit that has a very good cut, good durability, good longevity but still has a great price.
3 Year Warranty against defects in workmanship and materials.
Bits are milled from solid steel bodies and are precision ground by CNC machines to tolerances of +/-.005.
Carbide tips are diamond honed up to a 400-grit for a mirror finish with razor sharp edges.
High hook and shear angle designs are used to allow the bits to slice through the wood for a clean, fast and chatter free chip removal.
Anti-Kickback safety designs are used in bits that are 3/4" in diameter or greater.
Bodies are heat treated for strength and durability.
Non-stick PTFE coating applied to prevent pitch and resin build-up.
PRICE - These bits are up to 70% less then you will find elsewhere.
Watch How to Make a Lock Miter Joint!!!
You May Also Like
-
$35.95$32.95
