Raised Panel Cabinet Door Router Bits | EAGLE AMERICA
EAGLE AMERICA Raised Panel Cabinet Door Router Bits are 2 and 3-wing horizontal bits are designed for straight raised panels as well as arch pattern and cathedral doors. These bits can also be used to make attractive drawer fronts, table tops, plaques and moldings. Use With 5/8" to 3/4" stock. NOTE: Beige area on illustrations denotes what you loose with 5/8" material or use with back cutter. Minimum 2 H.P. variable speed router recommended. Do not exceed 12,000 RPM. Multiple light passes required. 2 and 3 Horizontal bits are carbide tipped feature anti-kickback design with bearing guides. Made in the USA
The Eagle America Difference
The Eagle America Brand was created for the professional woodworker who needs a serious router bit with an exceptional cut, extremely high durability and longevity.
Lifetime Warranty against defects in workmanship and materials.
Precision ground carbide to +/- .005 tolerances and Balanced to speeds in excess of 25,000 RPM for true, chatter-free running.
High hook and relief shear angles with wide open gullets for easy chip ejection.
Single-piece, SOLID STEEL Bodies, not just a mere sand casting.
Finest Micrograin Carbide up to C-4 grade with tips up to 1/8" thick for longer life.
Shielded, high-RPM-rated bearings have special lubricants for mar-free routing.
Carbide honed with a 600 grit diamond wheel to a razor sharp mirror finish edge.
Steel is heat treated up to 3 times, and tested up to 45 RC hardness to guarantee against breakage.
Precision-ground shanks.
Product Options
You May Also Like
-
$49.99$39.95
